PVC window frames usually come in predetermined colors and do not lose their paint over time as it is material itself is dyed. A quality built structure will have ties that span from rafter to rafter every four feet. This is the angle of side cut which is marked on the top edge of rafter. Step stringers are the support pieces at the sides of structure that hold up the steps you walk on. Apply caulking on back of the roof edge and to adjoining building. Position end siding panels in place and anchor them solidly. (https://shedconstructionplans.com/10x10-two-storey-shed-plans-blueprints) T1-11 panels do not come pre-primed and texture is somewhat on rough side.
Start nailing the pieces of lumber to door and corner posts. The second story floor joists are supported by a ribbon board set into the studs. Your storage shed roof can be built by either making trusses or framing with a ridge board and rafters. Create a work desk by using a long board and two rolling carts or stationary cabinets. Plus, you’ll have a greater color selection if you order the roofing rather than buy off-the-shelf panels. Also take into consideration tools you may need for job, because they could add up especially if you need specialized equipment. To prevent differential movement between boards ensure that you have some sort of support along plank edges.